HTH Series

Tube Honing Machines

เครื่องขัดกระบอกไฮดรอลิค SUNNEN รุ่น HTS-S กำลังขับ 7.5 Kw พร้อมชุดเกียร์ 4 step ให้ความมั่นใจในกำลังขัดที่ครอบคลุมขนาดรูกระบอก 

The HTH-S series is working with a 7.5 kW spindle drive system. Together with the 4-step gearbox the HTH-S ensures maximum power over the whole diameter range (up to 800 cm3/h). It is the first system of its kind which offers highest flexibility on a production level.

MACHINE SPECIFICATIONS

• Diameter Range (I.D.): 25 – 1000 mm (1 – 40 in)

• Diameter Range (O.D.): 60 -400 mm (2.4 – 15.8 in) standard; 350 – 600 mm (13.8 – 23.6) optional

• Spindle Motor: 6.0 kW

• Spindle Speed Rate: 15-450 RPM

FEATURES + BENEFITS

• A PLC control and digital display allow complete control and monitoring of machine conditions.

• A built-in load meter indicates high and low spots in the tube bore as the operator can adjust the stroke as required for optimum cycle time.

• Operator can also work out tight spots in the bore when using the Short Stroke Cycle and Stroke Dwell features.)

• The Sunnen Modular Honing Tool System continually compensates for stock removal and stone wear to keep the machine running at peak efficiency at all times.

• The HTH series is available in two-meter, four-meter, six-meter, eight-meter, and ten-meter models. Several different tooling systems are available depending on the specific application.

• Lifetime application service with every machine purchase.